The Steriliser needs to cool down after a function cycle
before it can be used again for a new sterilising
The Steriliser has a thermal control to prevent it from
overheating - this needs to reset. Wait 10 minutes for the
Steriliser to cool down
The Steriliser may not be properly connected to the
Check the plug is in the socket and the switch is turned on
The Steriliser fuse may have failed.
Replace the fuse if necessary and check your residual current
device (RCD). Never use the plug without the fuse cover fitted.
Ensure replacement fuse is the same current value as the original.
Replacement fuses are available and should be ASTA approved to
The Steriliser works but the Power Indicator Light does
The Power Indicator Light may have blown and cannot be replaced.
Call customer services on 01293 652500 for further information.