Go

Pour Over Kettle

Dualit’s electric Pour Over Kettle is ideal for using with drip through coffee makers or for when you need a precise brewing temperature. The precision spout allows for a more even flow of water for a consistent and slow extraction of coffee, this means the maximum flavour and aroma is extracted from the coffee grounds for an exceptional filter coffee. The Pour Over Kettle also offers a better reach than traditional kettles, thanks to the long and curved gooseneck spout.

View pour over kettle

Product Notices

  • | June 29, 2016 -

FAQs

KETTLE IS PLUGGED IN BUT THE SCREEN AND LIGHTS ARE NOT WORKING
The appliance needs waking up.

Press the Start/Stop Button to illuminate the Screen.

The Kettle has not been used for 10 minutes

Press the Start/Stop Button, it will illuminate. Press the button a second time to wake and illuminate the Screen.

The Kettle is not on the Power Base.

1. Return the Kettle to the Power Base to remove the dashes across the Screen.

2. Ensure the Kettle is correctly sat on the Power Base.

The Kettle may not be properly connected to the power supply or the fuse may have failed.

Check the plug is in the socket and the switch is turned on. Replace the fuse if necessary.

THE KETTLE DOES NOT HEAT WATER
Boil dry feature may have been activated. If the Kettle is accidentally switched on with no water inside, the boil-dry device will switch off the heating element to prevent damage to the Kettle.

Wait 10 seconds for the Kettle to reset. NOTE: if discolouration of the heating plates has occurred, this can be easily removed by descaling your Kettle.

WATER IS SPURTING OUT OF THE SPOUT
You may have over filled the Kettle

1. Only fill to the max mark (800ml).

2. Wait 10 seconds to allow the heated water to settle before pouring.

The Kettle may have descaling solution remaining inside the body

Follow the instructions from the cleaning & care section and rinse thoroughly.

Manuals