Check the selector switch is set for the number of slots being
Starting from the left, ensure you have loaded all heated up
The heavy duty proheat elements can take a few moments to reach
optimum toasting temperature. preheating the slots prior to
inserting your bread will eliminate this. Rotate the 'timer' all
the way round, let it wind down to the circle indicator then insert
your bread into the active slots.
Ensure size and type of bread being toasted is the same.
End elements take a little longer to warm up than centre
elements, once toaster is at optimum operating temperature this
will no longer occur.
The timer is noticably slow, unplug and do not use the toaster.
Spare timers are available from www.dualit.com and must be fitted
by a qualified electrical engineer
If this is the first time using your toaster, this is normal,
your elements are being conditioned.
Empty the crumb tray. A build up of crumbs can burn or cause a
Some crumbs or pieces of bread may be stuck in the toaster.
Unplug, remove the crumb tray then turn the toaster down over a
sink or bin and gently shake the crumbs out or use a soft brush to
clean inside your toaster