Go

Search

press enter to complete search

Cino™ Milk Steamer

The Dualit Cino™ Milk Steamer is dedicated to creating professionally frothed and steamed milk for a range of indulgent coffees and luxurious hot chocolates. With continuous frothed milk available, your hot drinks service will be faster and more efficient, as your coffee machine is free to concentrate on making espressos. The Cino's sleek, stainless steel design will make it a stylish addition to your café, or even your own kitchen, for those who enjoy barista style coffee and hot chocolate at home.

View cino™ milk steamer

Product Notices

  • | June 29, 2016 -

Coffee Spares

Water Filters - 6 pack - CMS1

View all spares

FAQs

MY MACHINE IS MAKING A LOUD WHISTLING NOISE WHILST PRE-HEATING
1. The machine is pumping water through the system at high pressure.

1. This is normal operation.

AFTER FROTHING MILK, MY MILK IS NOT FOAMY
1. Your milk is not cold or fresh enough.

1. It is easier to make froth using fresh, cold semi-skimmed milk.

2. The Steam Wand is blocked with milk residue.

2. Clean Steam Wand and Nozzle and descale machine (see page 12-15). If you are unable to unblock your Steam Wand then contact Dualit on 01293 652500 for advice or spare parts.

3. My milk is burning.

3. Reduce steam flow, rotate Steam Valve clockwise between the steam and off position (see page 10-11) or steam for a shorter period.

NO STEAM OR REDUCED STEAM IS FLOWING FROM THE STEAM WAND
1. Steam wand is blocked with milk residue.

1. Clean steam wand and nozzle and descale machine (see page 12-15). If you are unable to unblock your steam wand then contact Dualit on 01293 652500 for advice or spare parts.

2. The machine has been turned on with the steam valve left open.

2. Close the steam valve and open again to steam.

3. The machine has not been descaled in the recommended time. The Indicator Light has illuminated RED. The machine has entered Lock Mode.

3. Complete Descale procedure. (See Page 12-15).

Manuals